Replacement scroll wheel for Lenovo ThinkPad Bluetooth Silent Mouse
Arrives damaged? Free reprint, just film the box being opened. Returns policy
From the original design page
Original maker's notes
By impulse1delta on Printables · CC-BY
I had 2 of these mouse fail in the exact same way. The scroll wheel breaks before the first battery runs flat ! Properly unacceptable, trash quality. Still, I don't like to see these things go to waste. I designed an easy to print replacement part.
This is only the hub of the scroll wheel, it fits the original rubber ring, make sure to keep it !
The part is split in 2 connected halves that fold together. You can glue it if you'd like. I didn't, it holds pretty well already with the rubber ring around it.
You must use 0.05mm layer height !
The part likely to break when you try to detach it from the print bed, be cautious and take your time !
Tip for printing in PETG on a flat PEI bed: use some glue stick on the print area, when the print is finished, let the print plat cool-down completely, then use some water to dissolve the glue, the part should detach effortlessly.
To assemble the new scroll wheel:
Lift the mouse cover, remove the 3x T6 screws and open up the mouse
remove your broken wheel, separate the rubber ring, we will reuse it !
remove the 3x PH00 screws from the button PCBA (no need to unplug the ribbon cable)
Fold your new scroll wheel and assemble the rubber ring around it
lift the button PCBA and insert the hexagonal shaft of the new wheel in the encoder (use some flush-cutters to trim the shaft a little bit if it doesn't fit)
place the PCBA with the new wheel back in place, then reassemble everything in the revers order
Design file
Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.
Printing Replacement scroll wheel for Lenovo ThinkPad Bluetooth Silent Mouse
For Replacement scroll wheel for Lenovo ThinkPad Bluetooth Silent Mouse we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Category | Gadgets |
|---|---|
| Downloads at source | 5 |
| Original model | View on Printables |
| Designer | impulse1delta |
| Licence | CC-BY |
More popular Gadgets models
Got your own design?
You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email. Found a model on MakerWorld? Download the 3MF there and upload it here.
- STL, STEP and 3MF
- Priced from £4
- Free Tracked 48 over £40
- Printed in-house in Hampshire
Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts