Modern spiral planter

by SchulteGeileTechnik · from Printables

From £6.90 for customer-directed manufacture of one copy, plus UK postage · dispatched in 2–4 working days
Arrives damaged? Free reprint, just film the box being opened. Returns policy

Personal use only ♥ 27,206 likes ↓ 113,551 downloads Household

Manufacture one personal-use copy → View on Printables

Customer-directed manufacturing

Manufacturing service from £6.90 plus UK postage. The design itself remains supplied under the creator's licence. We prepare your model, print it across our calibrated production fleet and quality-check it before it is dispatched in 2–4 working days.

1. Pick a material

2. Copies (limited to one)

3. Pick a colour

Filament colour

This is not a catalogue product sale. The creator has licensed the design for non-commercial use. You may appoint Hark Tech as your manufacturing agent to retrieve the file and make one physical copy solely for your own personal, non-commercial use. You must review and accept the declaration before we retrieve or slice the file.

Good to know before you order

TPU has a £11.50 print-order minimum. ABS, ASA, PC, Nylon and PETG-CF have a £46 minimum; PA-CF has a £69 minimum. Delivery is shown separately in your cart.

Need a few parts? Add them to one cart. One order minimum and one postage charge cover the cart: £6.90 for standard materials, £11.50 with TPU, £46 with ABS, ASA, PC, Nylon or PETG-CF, or £69 with PA-CF.

Please check the model files include everything you need before ordering. We print the files exactly as supplied, so you receive the parts in the model, not necessarily a finished assembly shown in any photos. These are community designs by their original creators; we manufacture and post them but cannot guarantee fitment for your specific appliance or use case - check the original design page for compatibility.

From the original design page

Original maker's notes

By SchulteGeileTechnik on Printables · CC-BY-NC

If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532

The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be four lines wide and the printer can follow a continuous path (for this to work choose a wall thickness of at least two wall lines).

By default the flower pot has a height of 80mm and a maximum (outer) diameter of around 85.5mm. As seen in photos I also printed a small (~65mm high) and big (~95mm high) version, by just scaling the planter in the slicer.

There is a version with a closed bottom and one with drainage holes in the bottom for the excess water to escape. If you want to, you can print the small plate that I provided to catch any water flowing out of there.

If you like the design, I would be flattered to receive a little tip via PayPal: https://www.paypal.com/paypalme/geldanmax

Please note, that it is not designed to be printed in vase mode. If you want to, you can still try it, but it may not be watertight.

Since I am often asked about the blue filament in the photos, it is called "ERYONE Matte PLA" in navy blue.

Please keep in mind that this design is published under a NON COMMERCIAL license, so please do not sell the design or prints made with this design.

Formatting may have been simplified. These are the independent maker's instructions and fitment claims; Hark Tech has not independently verified them.

Printing Modern spiral planter

For Modern spiral planter we would normally reach for PETG or ASA — they shrug off UV, heat and damp far better than PLA outdoors. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.

Model details

Category	Household
Downloads at source	113,551
Likes at source	27,206
Original model	View on Printables
Designer	SchulteGeileTechnik
Licence	CC-BY-NC

More popular Household models

Got your own design?

You do not have to pick from the catalogue. Upload your own file and the price comes back in seconds, no quote form and no waiting on an email.

STL, STEP and 3MF
Priced from £6.90
Free Tracked 48 over £40
Printed in-house in Hampshire

Upload a file and see the price →

Designing it yourself? We print from your CAD export too. Printing from CAD · Business and trade accounts