The Fifth Element Stones (Elemental Stones)

UPDATE 5/18: "Fire_Stone_2018" and "WInd_Stone_2018 have been added. I removed the original versions as well as the earlier repaired versions and replaced them with the 2018 versions. All cut versions are still from the original files so if you are having problems printing cut or grouped versions download the 2018 files and re-cut them for your needs.

"UPDATE 8/17: Cut all stones in half for smaller printers. Also added a "GRP" file of each stone which is the two halves positioned on the build plate in the orientation that I printed mine. Support may be needed for some printers. I printed mine without support.

UPDATE: 12/16, Some people were having trouble with slicing the original "Fire Stone" so I added some new versions of that stone. I added the full stone repaired, a cut version oriented the way I printed them and then a sliced file of the cut version sliced with the Makerbot software. So now you have some options.

This is my version of the Elemental Stones from the movie The Fifth Element. They are 1 to 1 scale and were built in TinkerCad based on very good photos of the movie props. I did my best to make these as accurate as possible. The "damage/cracks" were drawn and placed as closely as possible to where they appeared on the photos of the props.

I made the stones hollow to aid in printing and I leave it up to you to cut them as you need to fit your own printers. 1 stone cut in half took 11.5 hours to print on my Mbot clone. Be sure to check out my…