Cute Mini Octopus
Cute mini Octopus, articulated and printed without additional supports.
**It's designed so it can be printed at once. No assembly or supports required**.
Many different STL files, with straight or spiral tentacles, both with and without included support.
**UPDATE!!** v6 fixes some mesh errors, improves bed adhesion, and adds the [replaceable tentacle](https://youtube.com/shorts/on69shi7et0) and the HUGE octopus print.
To print the small replaceable tentacle, be sure to enable "print thin walls" in the slicer. No need for additional supports. Settings are the same as the [Octopus 2.0 tentacle replacement video](https://youtu.be/zj3bOYTX1Go)
To print the HUGE tentacle, manual supports are needed in the opened link.
Check my other articulated designs [HERE!](https://www.mcgybeer.xyz)
For **Commercial License** questions, [check here](https://www.mcgybeer.xyz/commercial-license)
Printing Cute Mini Octopus
For Cute Mini Octopus we would normally reach for PLA — it is the easy, economical default and suits the majority of models. We set the layer height, wall count, infill and supports to suit the model and how you will use it, and those choices are already priced into your instant quote. Want a specific colour or material? Tell us and we will match it where we can.
Model details
| Downloads at source | 1,265,433 |
|---|---|
| Likes at source | 75,469 |
| Original model | View on Thingiverse |
| Designer | McGybeer |
| Licence | CC-BY-NC-SA |
