Self-Watering Planter (Small)

Introducing the first design from Parallel Goods.

This Self-Watering Planter is exactly the growing environment your plants need, while giving you flexibility in your watering routine. It’s super easy to use: just plant your favorite herb or other water-intensive plant, add water, and you’re all set.

The Self-Watering Planter was designed to be 3D printed, easy to setup, use and clean; while at the same time allow for customization through mixing and matching different colors for the pot and reservoir. Be sure to check out the Instructions tab to make sure you get the most out this Self-Watering Planter.

This Self-Watering Planter is part of our 2015 Desk Collection, with more great designs available at [parallelgoods.co](http://parallelgoods.co).

Follow us on [Thingiverse](http://www.thingiverse.com/parallelgoods/about), join our [Thingiverse Group](https://www.thingiverse.com/groups/parallelgoods), and follow us on [Twitter](http://twitter.com/parallelgoods) and [Instagram](https://instagram.com/parallelgoods/) @parallelgoods and stay tuned!


This Self-Watering Planter was design to be printed in PLA, and we went through many iterations and lots of experimentation to develop settings which would allow for a water tight print. All of our testing and development was done in PLA to ensure success across a wide variety of printers, without causing too much of an impact to the environment.

**Water Tight PLA Slic3r Settings**
- Layer Height: .3mm
-…