Peristaltic Pump Improved for Nema 17
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
1/12/22 - Hello all,
I am no longer updating this, so consider this a final design. I’ve used mine for many years now and it’s still going strong, so I think I’ve achieved my goal.
If you’ve benefitted from this, or if you just think that it’s cool, please leave me a like!
All makers, check out www.NewMakeIt.com. We are the largest and most well equipped maker space in the greater Toronto area. You can also check us out on Facebook and Instagram!
This is a remix of the excellent design of Ralf's Perstaltic pump. I printed his pump and built it to his specs, but I found that the small stepper motors would not really run the pump consistently or with enough power.
I decided to modify the pump to accept a Nema 17 stepper. This gives the pump PLENTY of power to push whatever liquid that you're trying to push. I had to beef up the bearing holders a bit. I also added some mounts. There's a single pump mount and a 4 pump mount. (I'm using to add fertilizers to my aquarium, so I use the 4 pump version).
I'm still using the same bearings and screws that Ralf is using, so you can get a list of the required screws and bearings from his thing. There are countersunk holes in the pump base to mount the motor. If you don't use the motor mount, I've included a spacer to use in it's place.
The washer goes in-between the bearing and the bearing holder assembly on both sides. You can also use metal washers, but I found you can adjust the printed ones for a…
