Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Build your own jet and check it out on http://www.youtube.com/watch?v=6rX4xv5-NvE
Put a pressure regulator on the air line or it will blow to bits!
You will need:
10 x 220 mm steel shaft
10 x 14 x 10 needle roller bearing (x 2)
10 x 22 x 6 bearing
10 x 30 x 9 bearing
10 x 24 x 9 thrust bearing (x 2)
14 x 20 x 96 Ali tube (you can print this but it might bend)
