Parametric LED Tea Light
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
#### Features:
* Standard CR2032 Battery (Clip in)
* 5mm LED
* Easy Solder
* Ideal light source for your projects
* Optional Switch
* Text for lead identification of LED
#### Hats:
Hats can be placed on top of the tea light with a push fit, here are some
suggestions:
* Candle TeaLiight Hat: http://www.thingiverse.com/thing:1188098
* Christmas Tree Hat: http://www.thingiverse.com/thing:193814
(Diameter: 42; Height: 14.65; LED Holder Outer Diameter: 9.8)
* Snowman Hat: http://www.thingiverse.com/thing:1188099
#### Parts:
##### Battery Holder:
* https://solarbotics.com/product/bhold2032/ or
* http://www.digikey.com/product-detail/en/BS-7/BS-7-ND/389447
##### LED:
Any 5mm LED that has a 3 Volt forward voltage or less will do, here
are some animated suggestions:
* https://www.sparkfun.com/products/11450 (slow color cycle)
* https://www.adafruit.com/products/679 (slow color cycle)
* http://shop.evilmadscientist.com/productsmenu/partsmenu/353 (candle flicker)
##### Switch (Optional):
The battery holder can be used as a switch by using the built
in clip, but if a switch is desired:
* http://www.digikey.com/product-search/en?keywords=CKN10397
DISCLAIMER: Use at your own risk.
