Rotating Organizer / Parts Assembly Sequencer / Display Stand

An easy and practical print that has multiple uses in every home, office or workshop. Great as a gift.

This design features independently rotating layers with cubicles for organizing and /or displaying small parts, jewellery and other things... and can be used to make disassembly / reassembly of things a much easier process. Printed according to the recommended settings this doesn't use much filament, can be printed on small machines and provides a practical solution to everyday problems / needs.

There are three parts to this design:

- The Base is the static part that sits on your shelf / bench / desk. If necessary, to stop sliding / movement while rotating the layers above, place a non-slip rubber pad or similar underneath.

- Layers are the mid sections in this design. Print as many as you need to store as many parts or things as you want in the 5 x cubicles available on each layer.

- The top is the same as the Layers (above) but doesn't have a shaft coming out the top to accept another layer. It has a flat top instead.

This also features a clever 'Part Sequencer' facility...

When you are dissembling something and need to remember the order to reassemble parts, make sure you are using the correct screws in the right places and not forget parts along the way then this could be a great solution.

As you start disassembling something place the first small part/s removed in Cubicle 1 on the bottom layer. Place the second part/s removed in Cubicle 2…