Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
It's finally here. The new FPV-Rover V2.0
https://www.thingiverse.com/thing:2952852
This is a remix of the drogerdy designed by timmiclark.
http://www.thingiverse.com/thing:700835/#files
Upgrade 01:
http://www.thingiverse.com/thing:1269962
Upgrade 02:
http://www.thingiverse.com/thing:1700138
Upgrade 03:
http://www.thingiverse.com/thing:1936491
Upgrade 04 by Superfly851:
http://www.thingiverse.com/thing:1979227
Upgrade 05(Nerf Dart Launcher):
https://www.thingiverse.com/thing:3835285
Videos on Youtube
https://www.youtube.com/watch?v=4Qc0D7U5R0s
https://www.youtube.com/watch?v=6tj8FTdTix0
https://www.youtube.com/watch?v=TQPVS7V3_Jw
https://www.youtube.com/watch?v=x7D1qESYsrA
https://www.youtube.com/watch?v=jhvpuBi0zO4
https://www.youtube.com/watch?v=lbQW_ebiLKA
https://www.youtube.com/watch?v=BlgNhrQPaEA
https://youtu.be/AgPFbaMxf3g
<b>Instructions:</b>
Body: The body has a support on the bottom to become a clean print. The support has to be removed after printing. Infill: 15%
Track: You'll need 64 tracks. Infill: 15%
Pin: There are two different pins. The normal one is 3.7mm. If the chain is to tight, you should print the small one with 3.0mm and add 3-4 of those pins. After printing the pins, you have to remove the small support on each side. Infill: 15%-20%
Small cog: You need 8 small cogs. Infill: 15%
Main cog: You need 4 main cogs. Infill: For the first 10mm you can print it with 15%. For the rest you should use at least…
