Ray Gun from Black Ops SOME CODE INCLUDED
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Ray Gun from Nazi Zombies in Call of Duty: Black Ops. Now ready to accept electronics to become a fully functional prop!
I used some blueprints that I found online to scale the model. It feels quite comfortable in the hand.
Supplies:
* Epoxy
* [Two small magnets](http://www.ebay.com/itm/361277630347?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)
* Some wire
* Clamps or some weights (cans of soda work too)
* Wax paper
* Flat surface
Hardware:
* 4x M3x10mm Socket Head Cap Screws
* 2x M3x16mm SHCS (for hinge and trigger)
* 6x M3 Nuts
* 6x M3 Washers
* [1x M3 Threaded Insert](http://www.banggood.com/100pcs-M34mm-H62-Brass-Knurl-Nuts-DIY-Accessories-p-971077.html) Worth it to have 99 extra for other projects.
Electronics:
* [A 3.3V Microcontroller with at least 5 pins for data](https://www.adafruit.com/product/2010)
* [A Battery Charge Circuit for your MCU](https://www.adafruit.com/product/2124)
* [Adafruit Audio FX Mini Board](https://www.adafruit.com/products/2342)
* [Adafruit Mono 2.5W Amp](https://www.adafruit.com/products/2130)
* [Mini Metal Speaker](https://www.adafruit.com/products/1890)
* [LiPo 1S Battery that will fit](https://www.adafruit.com/product/2124)
* [6 or more WS2812B LEDs on Individual Pads](http://www.ebay.com/itm/221989107317?_trksid=p2055119.m1438.l2649&var=520864017017&ssPageName=STRK%3AMEBIDX%3AIT)
* Servo wire for those LEDs
* 2 Small pushbuttons.
* [SPDT…
