Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Both [FlorentF31's design](http://www.thingiverse.com/thing:1120168) and the original [Sigan 180 quad](http://sigandrone.com/) are great design's but found that I had to tweak / scale them to get it into my printers build volume, that along with wanting to use 22XX motors I was needing a more "modular" design.
####Update 23 June 2016.
after yet another... test landing (crash) it highlighted that the motor mounts were a little weak without the support of the top casing, I have added 2 new files that now add a power strut around the motor mounts and down the arm, adding strength to the arm and doubling as landing skids.. win win.. have fun flying.
New files:
~V5_Rear_arms.stl
~V5_Front_arms.stl
####Sub $100 electronics kit.
~ [Complete Kit](https://www.gearbest.com/multi-rotor-parts/pp_294317.html?lkid=11472019) - I have found a great parts kit that has everything you would need to get this in the air, the only additional item would be a RX receiver.
####Training quad.
The [Warlark pro 85](https://www.gearbest.com/brushless-fpv-racer/pp_625800.html?lkid=11822692) is a great learner brush-less quad that can be flown both indoors and outdoors, and its UBER fun!
####Parts List..
As complete as I can make it.
~ [Aluminium hex spacers](http://www.hobbyking.com/hobbyking/store/__56768__Lightweight_Aluminum_Hex_Section_Spacer_M3_x_13mm_10pcs_set_.html), 5.5mm versions so make sure you print the correct case for these, your gonna need 17 of them.
~ [M3x6mm…
