Greenhouse-Dome (clickable) / Treibhausdom

<b>Greenhouse-Dome (clickable)</b>
(Treibhausdom für Kräuter und Pflanzen - zusammensteckbar)

Your seed, seedlings and plants also need a warm environment?

Based on the two Mini-dome parts hexa and penta from obijuan, i made a Greenhouse-Dome and other parts. With the parts here you can build a full (small) greenhouse-dome! All you need is a piece of PVC foil and a 3D printer. Even the connecting pieces can be printed if desired (or simply use wooden sticks). And the whole Greenhouse-Dome can be plugged together!

<b>New parts allow now a Greenhouse-Dome with any height!</b><br><br>


<b>For my greenhouse as in the picture above (the small white-green dome), you need the following parts + a pvc-foil:</b>

20x hexa (P-01)
6x penta (P-02)
40x A-Connector (P-03) or use 8 cm pvc-sticks
55x B-Connector (P-04) or use 9 cm pvc-sticks
10x hexa_V-Teil_fuer_Folie_V2 (P-30)
7x Folienklemme_schraeg_V2 (P-32)
3x Folienklemme_mit_Bodenanker_lang_schraeg_V2 (P-33) as ground anchor
+NEW: 10x Folienklemme (P-40)

Diameter: ca. 27-32 cm
Height: ca. 26 cm

<b>Note:</b> The big white dom in the fotos uses some of the new parts (see below the update from 22.05.2016).

You can find here also many other parts to download. For example, parts for a lower Greenhouse-Dome (3 level instead of 4-level high). Or a Dome-structure without foil. Or a garden house with individual height.

How the whole Dome is put together, you can see here (2V/L2 Icosahedron Dome). You'll…