Terminator Arm that WORKS!
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Hi All.
I decided to make a working 3d printable Terminator 1 Arm for all.
Wires pull springs in the hand pistons causing mechanically operated fingers to close.
Releasing tension causes the fingers to straighten.
I have uploaded the un-smoothed version for easier modification, excluding the wrist.
I printed each piece at a time, but you can try print it as I have supplied it.
Items labled with an X3 should be duplicated 3 times and X15 -15 times etc.
Tubing is quicker to find than to print, so I suggest making a trip to your nearest hardware
for tubing, shafts and screws, unless, like me, you have some lying around.
I also suggest that you print in ABS so you can solvent weld some of the parts or repair it easily if parts break. If you have any requests or questions, leave a comment and I will do my best to reply. I will be posting a making-of video on youtube soon. Visit www.antsinafrica.co.za for more info.
Have fun and enjoy!
