Sliding Door bolt Print fully assembled

Make sure to check out http://www.thingiverse.com/thing:2165626 for add-ons for this thing. This includes alternative fixings and spacers for the main bolt and standard receiver.

Update 6 July 2020.
I've added a sliding bolt release tool. Print 100% infill.
Place part with hole on a solid surface, put bolt in bolt shaped recess in this part then put other part with protrusion over back of bolt and tap with a small hammer to release.
I hope this makes sense, just let me know if this works for you.
It should get the bolt moving and is safer than trying to find random items and causing injury,

I've added a fully assembled door bolt to print.
either complete or just the bolt itself.

I've included a reduced contact sliding bar version to help with prints that seem to be fused together, please let me know if this helps.

Supports not required unless using the no support versions.

I've added two versions with improved support for the ball handle, the previous ones the ball appears to be distorted but not unusable.

If anyone prints these two with improved ball support, can you let me know if this fixes the problem, my printer is out of action for the next week or so.

Print at least 3 perimeters and at least 27% infill or higher.

I would recommend using a raft not a brim.

Don't scale the assembled one down as the tolerances would be too close.

If your printer is like mine, the parts seem slightly stuck together when printed, then you should still be…