Foldable Brushed Microquad
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This one doesn't make much sense (since when are micros too big?), but it's cute...
83x58mm when folded, 138mm motor-to-motor (diagonally) when unfolded. So no, its not very micro, I know. And it's one heavy micro, don't expect to do any acro with it. I designed it mostly because I had an idea and I like to draw stuff ;)
The Quanum micro camera/vtx combo from HobbyKing fits perfectly and the camera angle is adjustable between 0 and 30 degrees. The arms have slots for clean wiring and to prevent accidental cutting of motor wires when folding the arms.
I'm running mine with the following hardware:
* Beef's Brushed Board (flashed with Betaflight)
https://www.fpvheadquarters.com/beef-s-brushed-board.html
* 8.5mm (outer diameter) brushed motors
https://www.fpvheadquarters.com/angry-beez-8mm-brushed-motor-set.html
http://www.banggood.com/Chaoli-CL-820-8_5x20mm-Coreless-Motor-for-90mm-150mm-DIY-Micro-FPV-RC-Quadcopter-Frame-p-1054803.html
* Parrot Rolling Spider propellers
http://www.ebay.com/itm/4x-Propellers-Props-Replacement-Blade-for-Parrot-Mini-Drones-Rolling-Spider-New-/
* Fissel micro frsky rx (only if you have a FrSky compatible transmitter e.g Taranis)
https://www.fpvheadquarters.com/microfrx-receiver.html
* 750 mah 1S Lipo (a bit too big though)
http://www.hobbyking.com/hobbyking/store/__41271__Turnigy_nano_tech_750mAh_1S_35_70C_Lipo_Pack_Walkera_V120D02S_QR_Infra_X_QR_W100S_.html
* Micro camera/vtx…
