The 'Cactus Stand' is a modular system for hanging up keys, bracelets, watches and more. The stand is made up of a base, which has a tray to hold things like coins etc., then layers with arms protruding to hang things on.
Print in your choice of color/s so it looks like a cactus or alternatively is seen as a modern modular expandable stand for hanging things. Print one for yourself but also great as a gift.
The arms slot onto the layer below and are free to rotate almost 360 degrees... this lets you hang things in a position where they won't interfere with whatever is hanging on the layer below. There are four layer options:
Narrow - Has a 20mm space between the trunk and upright at the end of the arm/s There is a single arm and double arm option.
Wide - Has a 30mm space between the trunk and upright at the end of the arm/s There is a single arm and double arm option.
Two additional files are provided. There is a cap to top the Cactus Stand off and an extension in case you need additional height between layers and arms.
The result is a modular system for hanging all sorts of things. Just print the number of layers / arms to suit what you want to store... and add more later if you want to expand the stand.
With a well sliced file and printed on an accurate / precise machine the layers / arms should rotate smoothly and securely on the layer below. Juts slot one layer onto the pin protruding up from the layer below... it's easy!
Please refer to the…
