Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
**Update May 18th**: Printed a regular size thin box and noticed a gap on the top left rail that holds a stacked box. Causes the rail to not print. I've added v1.4 for that box to fix the issue.
-
**Update May 5**: Fixed another issue with the back ramp inside on the thin boxes.
-
**Update May 1**: Fixed another spacing issue in the two thin walled versions. They work much faster. The tall version took me 4.5 hours to print down from 8.5 I believe. There was a slight bow to the side walls on my tall one, but there are no problems stacking them or stacking on them.
-
**Update 2 Apr 30**: Added a v1.1 of the thin walled versions. Previous version had a .6mm gap between the bottom of the interior ramps along the corners and the floor.
-
**Update Apr 30**: I've added a tall version of the box which is the exact same except 20mm taller. This makes it easier to get things out of the box when another is stacked on top.
I've also added two versions of each with 1.4mm walls rather than 2mm walls. **I haven't finished printing one of these yet, I am currently doing so**. For my .4mm nozzle this takes the number of passes per layer from 5 down to 3. This should greatly reduce the print time. The dimensions are the same and should stack the same with any old boxes. The only exception is the old divider may not work with the new boxes.
-
**Update Dec 26**: Added a base that will clip together to hold multiple boxes in alignment next to each other in a…
