CiiiCooler for Wanhao Duplicator i3 / Maker Select

The <a href="http://www.thingiverse.com/thing:1025471" rel="nofollow">DiiiCooler</a> is a better cooler, but the CiiiCooler is a good alternative.

[RECOMMENDED RADIAL FANS]
Duplicator i3 V1, V2, V2.1 (12V): <a href="https://www.banggood.com/3D-Printer-12V-DC-50mm-Blow-Radial-Cooling-Fan-p-980653.html?warehouse=CN&ID=0&p=DZ1112667138201407XF&custlinkid=1718478" rel="nofollow">https://www.banggood.com/3D-Printer-12V-DC-50mm-Blow-Radial-Cooling-Fan-p-980653.html</a>
Duplicator i3 PLUS (24V): <a href="https://www.banggood.com/custlink/vKvEsY2STm" rel="nofollow">https://www.banggood.com/Anet-DC24V-5015-50x50x15mm-2-pin-Exhaust-Blower-Cooling-Fan-p-1530026.html</a>
(Please check the polarity before plugging in the new fan, your own risk...)

The CiiiCooler is a cooler that is to be mounted around the hotend of the Wanhao Duplicator i3.
It provides a 300 degree field of cooling around the hotend for the part being printed.
It sacrifices 60 degree of field compared to the DiiiCooler, but provides a view of the nozzle and a more even flow of air around the nozzle compared to a directional or bi-directional cooler.

Print this item without support; in ABS, PET-G or other filaments that can stand a bit of heat.
(PLA has worked when testing the prototypes, but use it at your own risk.)
Print the CiiiCooler with the flat bottom down against the bed.

[CHOOSING THE RIGHT CIIICOOLER]
CiiiCooler_1-32.STL will work for most printers out there.
CiiiCooler_SHORT_1-32.STL…