Anet A8 - External lcd enclosure v3.2

External case for the lcd module with buttons of the Anet A8.

Print the files at the layer height you want, at 0.28 infill 5% it needs nearly 4 hours for the front and nearly 1 hour for the supports.

v3.2:
- Added a NO TEXT alternative for the front piece

v3.1:
- Added an alternative pair of supports without screw holes for the base but with flat rails 49.5x20mm that you can use to stick the support to a rigid surface with double-sided tape.

v3.0:
- Added a rear panel with 3mm screws supports for the ones which plan to mount in on top of some printer enclosure.
- Added holes for fixing it in the 45° supports.
- Added holes for screws in the supports. They can be hided inside the enclosure or you can left them on the outside for better maintenance.

v2.0:
- enlarged holes for nuts (+0.4mm) in the supports.
- enlarged holes for push button (+0.4mm) as someone had some trouble inserting the plastic buttons in the holes (it may vary slightly depending on the precision of the chinese who soldered the buttons in place).
- made the front plate thinner (2mm instead of 3mm) to reduce print time and material waste.
- centered the Anet A8 text for making the first layer more sticky on the corner in witch was the text before.

Please report any issues in the comment section and I will try to solve it applying updates to the files. Thank you.

<!!!!!!!!!!!!!>
IF YOU LIKE MY DESIGN, FEEL FREE TO CLICK THE "LEAVE A TIP" BUTTON ON MY PROFILE TO ENCOURAGE ME TO…