Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
*DECEMBER 2021 UPDATE*
Nano Vise V2 is available here:
https://www.thingiverse.com/thing:5178901
you can support my work by clicking the button below:
<a href='https://ko-fi.com/V7V678BCK' target='_blank'><img height='36' style='border:0px;height:36px;' src='https://cdn.ko-fi.com/cdn/kofi4.png?v=3' border='0' alt='Buy Me a Coffee at ko-fi.com' /></a>
please check here as well:
https://www.youtube.com/channel/UCkWGgSjbHl0JN86glKJZuTA
That is a sweet vise which was created by HyMech -but i wanted to go more smaller and down-scaled the files :)
After down-scaling the jaw depth was now just not enough in my opinion and therefore i made some modification to have 5mm jaw-depth.
As the screw itself went small too there is no more handle required (no big clamp force necessary for tiny parts).
another modification: slightly bigger slots on the sides
Clamping width approximately max.20mm
