Iron Man MK2 MK 2 Faceplate Mask interieur
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
18/06/19 The thingiverse member AlexKorvin made a very good make and an awesome video how to build it. You can see it here:
https://youtu.be/kXFmtYfuNdQ
Hope this might help some of you building the faceplate.
Thanks to AlexKorvin.
17/04/2017 some parts changed for better Fittings
Stand with space for batteries added.
Well I saw Vash's Interieur on therpf.com, but I could not find the files anywhere.
So I decided to create my own. They are not as good as Vash's but I think they will do :-)
https://youtu.be/l4hCRDaj2Zc
<iframe width="560" height="315" src="https://www.youtube.com/embed/l4hCRDaj2Zc" frameborder="0" allowfullscreen></iframe>
The mask is originally made by MIPRESIDENTE. Thingfiles here: http://www.thingiverse.com/thing:260152
I also putted two needed parts here for download.
One picture shows how the finished version should be.
I just created them to be printed without support. You will need a heat-blower to form them.
I used 3mm LED's for the eyes. The Eyes are printed Transparent and with 100% infill. The connector pins are simple microelectronic pins, which are normally used for arduinos or something similar. I took 12V voltage supply, but just because I got a 12V power pack.
I made 2 just to be printed. ist "part01-11" and "part12-17". You will also Need part 18 and the Stand, but I thought it would be easier to print These parts together. You will also Need to mirror all parts (1-18) one time, toget a full…
