Cyclone Dust Seperator
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a direct copy of LizzyDesign's Cyclone Dust Separator, except the large vortex filter has been broken into 3 smaller pieces so it would fit on a small bed sized 3D Printer like my Prusa Mendel Iteration 2. (Aprox 196mm wide X 196mm Depth X 90mm High).
The total Print weight for me was about 650 grams with a 15% infill.
To use this Cyclone Dust Collector you will need a Shop Vac, a spare vacuum hose, a bucket with lid, and 5 @ 6M Bolts with nuts and washers. Also you will need some type of glue to glue the Sections together. I used a CA glue and accelerator/kicker to glue the 3 sections together. It is a very simple build.
Please watch my Video on how I made it.
https://youtu.be/fe3hI5IohxM
