CoreXY Frame (v.2.0)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Printable parts for the CoreXY Frame based on the concept from FABtotum (without crossing belts).
!!! Prototype. Not tested.
Ver.2.1 for 5mm slot 2020 extrusion: http://www.thingiverse.com/thing:2266282
Extruder mount:
Titan: https://www.thingiverse.com/thing:2253311
Custom: https://www.thingiverse.com/thing:2664121
Laser: https://www.thingiverse.com/thing:2685298
CAD: https://grabcad.com/library/corexy-frame-v-2-0-1
Ver.1.0: http://www.thingiverse.com/thing:1811983
______________
20x20 aluminium profile 6mm slot for a 5mm slot search ver.2.1 in my Things
MGN12 linear rail 3 pcs. + MGN12-H/C carriage block 3 pcs. (Ref. link: http://ali.pub/vnk2s)
// for MGN9 rail + MGN9-H/C search "v2_X_bot_plate_MGN9_LR.STL"
GT2 6mm belt
(length depends of the desired work area - calculations on the picture)
__________________
GT2 pulley 20 teeth 2 pcs.
F694ZZ ball bearing 16 pcs.
2020 internal L-joint 4 pcs.
4x 40mm countersunk M4 screws (gantry)
4x 25mm countersunk M4 screws (gantry idler bearings)
10x 10mm buttontop M4 screws (motor mounts, corner idler bearing mounts, gantry rail mounts)
2x 30mm socketcap M4 screws (corner idler bearings)
2x M4 0.5mm washers (corner idler bearings)
8x M4 Nuts (gantry idler bearings)
8x 10mm buttontop M3 screws (NEMA17 motors)
8x 6mm buttontop M3 screws (MGN12H linear rail)
There are also 2 pins that are 26mm long x 4mm diameter which is placed through the bottom of the corner idler bearing mounts and are what the…
