Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
If you print it out please remember to share your make. It's always good to how other people have used the models :) Thanks!
This was designed for use on an IKEA Lack table allowing you to cut a various sizes of holes in the table and inset the grommet. Just choose your size for what you need and get printing! I used the grommet in my 3D printer enclosure but could be used anywhere. Check that out here: http://www.thingiverse.com/thing:2212749
A square version can be found here: http://www.thingiverse.com/thing:2265185
Updated (12/04/2017) - I have added all metric sizes in relation to the hole cutter linked below. All grommets are set to be 53mm deep.
Metric - 25, 32 ,38 ,45 ,50 ,56 ,62mm
Updated (22/04/2017) - I have added all imperial sizes in relation to the hole cutter linked below. All grommets are set to be 53mm deep
Imperial - 3/4", 7/8", 1 1/8", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2", 3", 3 1/2", 4", 5”
