Ultimate Drawer System
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I really like cruzher's drawer system, and the idea of wschadow's remix to expand to double drawers. But there are some limitation to me, so I decided to remix it.
**Changes from the original design :**
* Shelves original design are based on tongues to receive the drawers, when you want a double drawer you need to print the shelf that correspond to it. I gone to the opposite way, shelves are made with grooves, avec drawers have a tongue, that let you to print a drawer of any height and place it anywhere into the shelf,
* I wanted the shelves stackable horizontally and vertically for an easy scale up, this version let you attach shelves together with M4x8mm csk screws and M4 nuts, side to side or bottom to top
You can find printable nuts and bolts here https://www.thingiverse.com/thing:4877806 thanks to **Kleptomn**
* The shelves are wall mountable, each one have 4 5mm holes at the back
* Shelves are available from 2 to 15 drawers high
* Backward compatible with the orignal drawers, just print the small **Original_Drawer_Adapter.stl** and glue your drawer on it, it will fit to the new design
* Each drawers are available from 1U to 6U
* Little redesign of the handles, less round for easier print
Shelves are optimized to print with 0% infill, print faster with less material than the original design (not so much, just a little bit)
Feel free to ask any layout, I used a 12x12 grid, so ask any combination that fit into the grid.
You can find a…
