SwitchRest - Nintendo Switch Headrest

**Update: 8/12/2020**

Completely redesigned in Fusion 360 most notable change is the locking mechanism is now easier to use thanks to the suggestion of Thingiverse user [Ivankio](https://www.thingiverse.com/make:815561).

Locks can be placed on the inside or outside of the model whichever way works best for you.

**Warning**

Depending on your printer the rails could be a bit tight if that is the case use sandpaper or a small flathead screwdriver to try and make it an easier fit on the switch.

I am not responsible if you damage your switch.

Have fun.

~~**Update: 12/8/2018**~~

~~- Added switchrest-complete.stl (all components ready to print in a single stl file, locks already scaled to fit)~~

~~**Update: 5/24/2017**~~

~~- Added locking mechanism to secure switch~~
~~- Added switchrest-lock.stl (locking mechanism)~~
~~- Modified switchrest-left and switchrest-right brackets~~
~~- Added switchrest-complete.stl (all components ready to print in a single stl file)~~

~~Scale the locks down to 96% in your slicer and eliminate the need of post processing.~~

~~I highly suggest you do some post processing on the locks either sand or file the portion that locks into the rails before using this or you will have a hard time getting them off and possibly break the side rails.~~

~~Once you can insert/remove the locks easily proceed to insert your Switch.~~

~~With these last changes I consider this completed and I don't plan on making further…