Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
### F.A.Q
1. You **can** sell your prints on Etsy etc.
2. **Don't** ask me for a permission, instead **read a License** on a left (it's *CC - Attribution SA*)
3. I **don't** need your cut. Instead if you like a model or you making a profit out of it - [donate](https://paypal.me/eggnot1) me a small amount.
4. License is for a 3d/STL file and **NOT** for a **PHOTO** / other content
(you can't sell your prints using my photo, **do your own photo of your print**).
### DESCRIPTION:
Just a couple of modifiers to give Honeycomb vase(by radus) more stable bottom. Also i think it looks more organic. Done in Blender 3d, .blend file is attached.
[**sotvl_Spiral-Vase.stl**] is a solid shape. you should print it in "Spiralize Contour"(Cura) or "Spiral Vase"(Slic3r). Ts is **not** waterproof, as it will be small holes on a way up from bottom. So, it is not good for water, but soil is ok.
[**sotvl_thick** 1,2mm] - with a proper thickness calculation. 1mm and 2mm thick respectfully. probably waterproof... but not tested by myself with a print yet. Slice and print as a usual thing, **not** in vase mode.
[**sotvl_thick-Blender.stl**] is thick/thin shape. should be ok for usual print and waterproof, but need more testing with prints. At current state, it seems it **less reliable** compared to *sotvl_thick_* 1,2mm.
[**sotvl.blend**] - source Blender3d file, shape and thickness can be changed there. (for advanced users)
