Lynx - Fully 3D-printable 1/10 4wd buggy
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I have designed a new buggy. The STL's is free from here: https://cults3d.com/en/various/mkultra-3d-printable-1-10-4wd-buggy
Lynx will remain free but you shouldn't waste your time on it. Make the Mk Ultra linked above instead.
I appreciate it if you use my affiliate links to the parts below.
https://youtu.be/_fAOJI9BMSI
----
News - 12.11.2017
Added one piece chassis parts.
----
News - 21.08.2017
Added new wheels with countersunk holes on the inside for locking the printed tires with countersunk screws. The file is wheels03.stl
----
News - 16.08.2017
Changed the rear suspension arm and spindles to move the wheels farther away from the body and chassis. Also beefed up the front spindle in the upgrade set.
----
News - 05.08.2017
I made new lower suspension arms. They are stronger and don't rub on the wheels. The new parts are:
Armfront01.stl
Armrear01.stl
----
NEWS - 22.07.2017
https://youtu.be/j9Z--w-5pXA
I made upgrade kits for the front and rear drive shafts that use the Quanum Vandal CV shafts. This gives more suspension travel and steering lock than the stock plastic axles, and also doesn't wear every other run. I attached an exploded view of the assembly and some photos of the parts installed on the car. The set screw can be made by cutting a regular M4 screw, and the 2 mm pin can be made from piano wire or nylon filament if you don't want to buy them.
The new files are:…
