Nerf Stryfe AR15 / M4 Carbine Extendable Stock
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Facebook Group
https://www.facebook.com/groups/MakingStuffAwesome/
Why you should support me on Patreon
https://www.patreon.com/Ultrasonic2
These are the files for the updated Stryfe stock (Version 3) i made version 2. I have changed everything but the major improvements are improved stock sliding mechanism. I Also added the "Nut" thing at the base of "AR15-reciver_extension" to make it look better and to make it a bit longer (10mm). Also i have changed the stock to Stryfe mounting system to be a "crush" type.
AR15-reciver_extension.STL
The crush slot for the mounting bolt has a 45 degree taper so you can print this vertically and enable supports from the base and as longer as your angle is greater than 45 then it wont support in that gap which could be hard to get out if it did print in there. The bolt is a
M4 45mm with nut.
After printing the above print
Normal_Size_Test.STL This is a profile of the stock you can make this first to see if it fits AR15-reciver_extension.STL... if not print Normal_Size_Test_025_over_size.STL and try that one...
After that print the right size Stock
AR15-main_stock.STL/AR15-main_stock_025_oversize_.STL
I have made too version because everyone hates making things that don't fit. So now you have two options.. FYI i printed AR15-main_stock.STL
You can then print the latch AR15-stock_latch.STL
If you want you can print AR15-stock_swivel.STL and AR15-stock_swivel_screw.STL for some more eye candy. However i…
