Hera CQR Stock for AEG Airsoft
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
I added a sling holder to it. But it is more for the look. Dont use it to hang your M4 arround your neck. I also reduced the motor plate by 2% to have it fit inside.
I also created a motor shim since there is no screw for ajusting motor height. This goes on the motor. Added a M5 nut hole. and you will need a M5 screw to adjust motor height.
this was printed in PETG and a quick rough sanding. Job is not perfect, but next ones will be perfectly smooth.
Credit To Koobysnack and LupusWoraxCustom for the main job. Excellent design.
Change log:
1- Added a sling holder
2- Added a M5 nuts on the motor plate to be able to adjuste motor height
3- Reduced by 2% the size of the motor plate and created bigger holes for screws.
4- Fixed some minor issue on the stock.
5- Added a rail in the Motor plate for the adjustment screw of the Motor plate.
Printing:
Use PETG or ABS as the AEG motor gets really hot and will deform PLA. Print the stock up right only use support from the bed just for the pistol grip inside
