Tacblade Utility Stanley Blade Folding Knife
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is my folding knife design for disposable Stanley style blades.
Its a hybrid between a friction folder and a flipper.
Designed for the UK so no lock, but is very stable in the open or closed position.
100% printable, the bolt best at 0.12mm layer height and all other parts at 0.2mm layer height.
Its been designed to print so easily, no support, no rafts, no brims. Very lightweight but also rugged design.
Update 11/09/2017 v21 New bolt with larger tolerance so its not so tight.
Update 09/09/2017 v20 New inner and outer updated for a more secure blade.
Update 09/09/2017 - All new design v19 incorporates a better fit blade cutout, new construction to allow top case to be printed flat with logo up so nicer logo printing, more stable connection through the knife.
Update 08/09/2017 - added an additional lower case file for loose fit as not all blades are exactly the same size.
Update 07/09/2017 - new stl file for lower inner v18 to take up slack when open, also updated Print Layout to include v18 lower inner.
Disclaimer:
Tacblades will not be liable for any damage or injury as a result from use or misuse of the knife printed from these files. It is the responsibility of the owner to handle the knife with care and its intended use as a tool.
It is the responsibility of the owner to ascertain and obey all applicable local, state, federal and international laws regarding to the printing, possession, and/or use, of products made from these files.
