Raspberry Pi Zero W Security Camera

Im not the greatest at writing up howto's! So please be patient with me!

I had a problem with my girlfriends kids with lies and also hurting my daughter so I decided to make up a cheap camera. Plus it doubled as a security camera for the house when away as well.

The files will be optimized from 3yourmind with the exception of the top with vents. For some reason, the optimized slices weird in flashprint. I have not printed in ReplicatorG or Simplify3d. I have included the origional and optimized version for both.

For this project you will need
Printed parts;
1x main body
1x top vents
1x bottom
1x front bezel

Ive also included the .py scripts for RED led and GREEN led as downloads.

1x Raspberry Pi Zero W (need built in wifi!)
https://www.adafruit.com/product/3400

1x 8GB + Micro SD Card (MAKE SURE ITS COMPATIBLE AND KNOWN TO WORK)
I use Samsung 32GB (half yellow and half black) and works GREAT.

1x Raspberry Pi Cam (ebay purchased 5mp with 75 degree fisheye with night vision) (wider angle would be best!)
https://www.ebay.com/itm/1080P-Camera-Module-Board-5MP-130-Fish-Eye-IR-Night-Vision-For-Raspberry-Pi/202068425949?epid=582139582&hash=item2f0c377cdd:g:Og4AAOSwR21Zzfdn

1x Raspberry Pi Zero Camera ribbon cable (shorter one it would be better 40mm - 60mm?)
https://www.adafruit.com/product/3157

1x Micro tactile momentary switch (reset switch) (through hole…