Zipper Pull using paperclip
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Zipper pull replacement using a paperclip for a strong connection to the zipper.
There are several posts inside and should fit a variety of paper clips, some bending may be required.
I used 3 M2x6 screws to hold it together.
**update 11/2/17**
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip
Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!
Here's a link to the [On-Shape](https://cad.onshape.com/documents/734ac93fee0ee8a52863e585/w/55ed14bd65fefe02137358b4/e/bee6613f29706126bdd83dae) drawing if you care to re-mix it.
