Parts for 133% Ossum Jeep to fit RC 1/10
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Video : https://www.youtube.com/watch?v=ZGB7M1b0JCo
Ok. Now you be wondering why 133%? In real life, an Army Jeep is quite small vs the general size of vehicles, so if you scale it down by 1/10, it uses 1/18 or 1/16 scale of RC parts. But RC 1/10 scale is the more common type of scale we play, more parts & choices available so you can get even higher performance, torque, grip and tires and using the more commonly M3 size of screws and nut.
Still confused? just follow the below step/instructions. haha
----------------------------------------------------------------------------------------------------------------------
***Step 1***
First head to the original Ossum listing and download all the parts.
https://www.thingiverse.com/thing:2056923
The files you need to print from the ABOVE LINK are as follows,
***NOTE 1*** : always remember to apply 133% or 1.33 on the "scale" setting in your cura.
***NOTE 2*** : most are printed at 10% infill and 1 piece only, unless otherwise stated below
- bumper_front.stl
- bumper_rear.stl
- dashboard_et_al.stl
- fender_left.stl
- fender_right.stl
- front_floor_and_tub.stl
- grill.stl
- handle_side.stl (2x)
- headlamp.stl (2x in transparent filament)
- hitch.stl
- hood.stl
- leaf_thin.stl (4x at 50% infill has the right flex for my weight)
- rail_front_left.stl (100% infill)
- rail_front_right.stl (100% infill)
- rail_rear_left.stl (100% infill)
- rail_rear_right.stl (100% infill)
- rear_floor
-…
