RC Jeep JK Chassis complete scale RC Car kit 1/10 (except axels, gearbox, shocks, links and driveshafts)

I needed a second chassis for my Hong Kong Jeep JK Body (275mm Wheelbase). Not for heavy crawling but for onroad and a little bit of offroad activities. Some Parts such as Gearbox, Axles or Driveshafts are not for Printing. Here you can see how it performs with the cantilever-style suspension: https://youtu.be/d3j2n3TugSI

Because of many new and additional Ideas I put this Thing "under construction".
Usually I only publish finshed and working parts but it I think it gives you a little bit more orientation. Just look at the Last Updates....

I made a new body Suzuki SJ 410 for 275mm wheelbase. It should work with one of the flat setups in the rear. https://www.thingiverse.com/thing:2956295

Last Update: 21-04-2018 (Details see below)

I used some second hand rails and copied them. Later I saw that they are made by Karnegie in the US (SSR V2). Some modifications are made to fit the Jeep body and the motor mount. The gear reducer unit can be found here http://www.rcmodelex.com/www-rcmodelex-com/eshop/18-1-Transmissions/0/5/1080-MEX-G-BOX-7-4-1-BLACK-5mm

The servo is in the rails so that a lot of axles can be used. I tried it with RC4WD Yota II Clones, Axial SCX10 II Clones and MST CMX axles.

There are three different Versions for the Transmission:
* A - Simple 1:1 Transmission together with an RC Modelex Gear Reducer > See Pictures
* B - RC4WD R2 Transmission
* D - Axial SCX10…