Modular Hobby Paint Rack - Small Wall Hanging

Sixth of the modular paint racks to store and organize hobby paints. This one is a smaller straight section that is for wall hanging. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to hold paints such as Miniataire, GW and others!

**Capacity:**
<ul>
<li>20 dropper bottles (Vallejo, Reaper, Army Painter)</li>
<li>16 Minitaire bottles</li>
</ul>

Dropper style bottles can be stored in the upright or inverted position. I designed it more for the inverted position as that is the way I hold my paints to prevent tip dry out.

You will need to print the following to assemble one unit:

**One of the following:**
<ul>
<li>LeftSide-WallSmall</li>
<li>RightSide-WallSmall</li>
<li>BackSupportBottom-WallSmall</li>
<li>BackSupportTop-WallSmall</li>
</ul>

**Four of the following**
<ul>
<li>FrontHolder-WallSmall-(bottle style)</li>
<li>BackHolder-WallSmall-(bottle style)</li>
</ul>

To attach the top back support I have added screw fasteners since it will be hanging on the wall. You will need two 6-32 1/2" flat head machine screws and nuts. These are readily available at most big box hardware stores. After assembly just put the screws in with the head on the outside and hand tighten till secure.

The hanging holes in the back are made to take #4 screws. Use wall anchors if not drilling directly into a wall stud to hang.

Luckily these pieces would fight on the print bed but if it doesn't on yours…