Cafe Racer Twin Motorcycle

This is a customization and fix of a few different Cafe Racers Things. I took what I liked from each, modified some, repaired some, and created some completely new pieces to suit my vision. I wanted the wheels to spin, so I made the changes needed for that to happen. I also had to fix a few things that would prevent the model from being assembled at all. I also wanted a twin (all bikes should have symmetrical exhausts) so I modified the engine to have a second exhaust port and mirrored the pipe. I also HATED the big ole clunky solid triple tree (that was impossible to mount to the tank btw...) so I made up some normal plates that leave the forks exposed... as it should be in a perfect world. There are some pieces that would be too small to print with any accuracy, so I used the "sharpie paint" on a few to give them a little more detail.

The files included are the exact files I printed the Blue model with, so they work. Every part is designed to sit flat on the print bed. Minor cleaning of holes with a drill and trimming of the bottoms and this model goes together easily.

There are some options (thus a few extra pieces) that you can chose: single or dual front brakes, rear brakes or no, clipons or standard drag bars, 1 tach or tach and speedo combo... its up to you.

I printed this model at 200% to give it a little more presence, but it will print at any size your printer can handle.

Some of the bits here are only available in this thing, so, If you use…