DM Screen with Dice Tower
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
DM SCREEN AND DICE TOWER
7 Mar 2018
Missing Dice tray STL file added back in.
14 FEB 2018 ADDED PARTS!!
At the insistance of a grandson I added a roof and it needed to be raised, so hoarding which gives an additional storage area. Fixed some minor issues with the the tower where ramps extending above the top crenellations and of the crenellations being too thin.
Talking about storage, I modified the base to extend under the dice tray to double that storage - it will now hold pens or more dice. Mainly it prevents someone from overturning the set by proessing down on the tray.
The entire system as shown used just under a 1Kg roll of grey PLA, plus some black.
The tower can be printed with or without the attachment for the screen. Printing it without provides a standalone tower that could be used by the players.
Everything can be printed without supports as the only required supports are built in. However, supports may improve a few areas like the drawer opening for the base and the arms on the dice tray. If you would prefer to use the supports generated by your slicer for the frames, separate the parts (split command in Slic3r) and delete the two support pieces. The current design does need a razor knife to remove the supports, but they leave a clean surface which is important as it is a mating surface.
The base has a top mainly for when it is separated and if used to store parts or dice in. It is a tight fit and I used a bit of superglue from the…
