Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Hello everybody!
I had bought a professional knife set at the last Black Friday sale on Amazon:
https://www.amazon.com/dp/B002ZCKIBM/ref=cm_sw_su_dp
the knive set didn’t come with a block, so I created one.
SAFETY FIRST!
I will speak about safety because this thing will be at home and knives may be dangerous, so I hope you follow the three important steps below:
1) Use magnets as described on the project, you can find them here:
https://www.amazon.it/Magnetastico%C2%AE-neodimio-frigorifero-permanente-interattiva/dp/B00Z7YVU8A
2) Use rubber pads; print them with TPU95 or another rubber filament
3) Create the ballast with the milling machine - the one in my project has a weight of 2.3Kg
You need this hardware:
Phillips flat head self tapping screw 4.8mm x 22mm: 2pcs
Phillips flat head self tapping screw 5.5mm x 25mm: 2pcs
Neodymium magnets 8mm x 3mm: 4 pcs
Check everything else on the PDF and pics.
UPDATE 1 MAY 2018:
Added base without support for those who are lucky to have a bigger print volume
