Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a painting handle capable of holding miniatures with bases of 25mm as well as 32mm in diameter but not limited to this. The handle makes it much easier to hold a miniature during painting. It has 2 different slots for bases of different diameter. There is also a slot on the bottom where you could glue in a 10x1 magnet in order to stick it to some metallic surface (can lids?).
***UPDATE 10 May 2018:***
Version 3.3.3 uploaded. Many improvements are made to the design. Among them are:
- Caps design is changed and is now less prone to breaks
- Center point of the slot for 25mm bases is shifted so now bases are held much better
- Pins are added to the sides of the handle so it is easier to open
- All parts are oriented correctly so no need to rotate them before printing
Old version of the handle is available here: https://www.dropbox.com/s/ifzvas87bq0xauw/Painting_Handle_V3.1.zip?dl=0
***UPDATE 10 March 2018:***
- Added 0.2mm chamfer to the handle to prevent formation of 'elephant foot'
***UPDATE 5 March 2018:***
- gap between Handle and Platform increased from 0.2 to 0.3 mm
- chamfers added to the Cap
