CR-10 Mod - X axis Tensioner

<font color="red"><b>Update of 02/06/2019</b></font>

MAJOR UPDATE

X Tensioner for CR-10 / CR-10S

Mk7 Version

Upgraded the guide system and simplified all the models
Unified the screws dimensions (with my other tensioner versions)
Modified the minimum belt tensioning position (for short belts)
Slightly increased the tolerances compared to previous models
Added a New Shaped Knob, more "fancy" than the previous version.

Printing Tips :

Body --> Print in Vertical (better with supports, but not strictly necessary)
Screw --> Print Horizontally, lying on the flat face
Knob --> Print in Vertical (No supports Required)

Hardware Requirement :

For the OEM Version :

1 Screw M8x25
2 Bearings F688Z
1 Screw M4x8 (Button Head) + Adapter, Or The OEM M8 screw
1 T-Nut M4

NOTE : The OEM screw version has been prepared due to some users request, but I did not recommend to use it due to possible weakness problems.!

For the GT2 Version :

1 GT2 Pulley 20T
1 Screw M3/M4/M5 x20 (according the Pulley bearings)
1 Screw M4x12 (Button Head)
1 T-Nut M4

Fixing system :

- 1 screw M4x8
- 1 t-nut M4

The models are designed for the material stated below.

Note :

All the pieces has been tested and fit correctly.

If you cannot fit the pieces after the print, you are doing something wrong!

(Sorry guys, but I am tired of comments from people who are unable to print, and blame the models...)

<font color="red"><b>Update of…