Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Updated June 8, 2018(NS_Iris_Box_fuji6.stl)
I updated the design, since all people reported "outer ring is loose, lift up and fins are off".
1. I added stoppers at bottom of the outer ring(red parts in above picture), which should stop lifting of the ring. This parts are not included in original design.
2. I made variations "NS_Iris_Box_fuji6_01.stl" which has 0.1mm thicker fins and "NS_Iris_Box_fuji6_02.stl" which has 0.2mm thicker fins. So if you have good printers and print it in 100% or larger size, please try them.
---
Added April 22, 2018(NS_Iris_Box_fuji5_8.stl)
This is a test model to know what is wrong and best settings.
---
New April 22, 2018(NS_Iris_Box_fuji5.stl)
This is a remix of "Preassembled Iris Box" by emmett. This may be good challenge that how you understand 3D printing.
Since original model was not so fine and I wanted to know how the parts are linked, I reconstructed it in CINEMA 4D.
http://www.11moon.com/m200/Iris_Box/Iris_Box_1.mp4
http://www.11moon.com/m200/Iris_Box/Iris_Box_2.mp4
---
https://youtu.be/Wuf8cLwLiXw
