USB Cable Organizer

USB Cable Organizer

I designed this USB cable organizer so that I would be able to move it if I necessary.

I have included 4 different versions, a straight and a curved version with a snap-in insert and also a straight and a curved version without an insert

This was the first time I tried to design an snap together Thing, and it turned out fairly well.
Please let me know if you have any problems.

I designed this for a standard (1 1/2") (38 mm) thick table. If your table is a different thickness, message me with the size, and I will try to help you out.

Also if you have a different wire diameter I will modify it if possible.

EDIT
I have included a longer clamp screw to accommodate for a thinner table.

EDIT January 17 2019
I added a 26 mm standard version that will fit a 1 inch table.

EDIT February 08 2019
Added a 30 mm version at the request of a member.

EDIT February 10 2019
Added a 52 mm version at the request of a member.

EDIT May 13, 2019 2019
Added a no bottom version at the request of a member.
You can use two-way adhesive tape to secure it.

EDIT July 09 2019
Added a 22 mm version at the request of a member.

EDIT August 22 2019
Added a 22 mm version with wider slots at the request of a member

EDIT October 02 2019
Added a 147 mm version at the request of a member.

EDIT October 08 2019
Added a 97 mm version at the request of a member.

EDIT Nov 17 2019
Added a 40 mm version at the request of a member.

EDIT Jan…