Axial Hotrod (V5)
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
Loved the hot rod Ossum made so much I had to make one. I wanted it to be functional as an actual rock crawler so I put most of the weight up front and down low for steep climbs.
I designed it to work with an axial ax10 wraith or scx10 style transmission with an extended output shaft I had laying around. I am using my old rr10 bomber drivelines and ar60 axles on 2.2 wheels and tires.
This is designed to be printed on my anet a8 with a 220x220 mm bed, 200x200 is probably no problem as well.
The overall wheel base is 380mm so its a monster.
Rear links are 120mm
Front Links 160mm
Still need to finish the front battery tray for looks and shock mount is weak.but these files are drive able as you can see in the pictures.
Update V2:
Added assembled non print version.
Updated battery tray (Unprinted) Radiator in front doesn't look great from my slicer, need comments on how to improve. maybe just reduce detail. I print at .3.. on this.
Added Battery Lid (Unprinted) Not as easy to print as I would like and no mount system. so if your need this printed now, you can just drill holes down through the edges and install screws, or maybe double stick tape.
Update V3:
Ok so I didn't realize before I make an stl I should combine the parts into a single solid, then convert to stl. So some parts may print funky. Just fixed Battery tray, need to review other parts.
Deleted old files, Should I do that?
Going to need to beef up upper link mounts.
Update 3.5
no…
