Bowser from Mario games - Multi-color

>"Bowser, sometimes known as King Koopa, is a major character and the main antagonist of the Mario franchise. Bowser is a large, powerful, fire-breathing Koopa who leads the Koopa Troop, an antagonistic organization of turtle-like creatures, and has been the archenemy of the Mario Bros" - from https://www.mariowiki.com/Bowser

*The file bowser.zip contains all the STL files necessary to print this thing. if you have problems with the "body" file inside the zip, use the one outside.*

__Due to a large number of spikes and pointy things, I do not recommend this action figure to be used as a kid’s toy.__

This is a multi-color print. Print each part in the right color and glue then afterward. There is no need to paint anything.

The model is 18 cm high. Note that this is higher than all my previous models. Save some space on your shelf for this.

This is mostly support free. Some pieces will require a bit of support, but they are sparse and barely affect the aesthetics of the part.

#Assembly tips

First, let’s identify where all those spikes go.

1 - On the back:

The center line, from up to bottom, are the four files “shell_spike_1” to “shell_spike_4” (in the White folder).
The lateral left line, from up to bottom, are the three files “shell_spike_A_left” to “shell_spike_C_left”. You’ll have similar files for the right side, but with suffix “right” instead of “left” (also in the White folder).
All of the above are accompanied by the base pieces in the…