Two door enclosure for Anycubic i3 mega with Ikea Lack tables
Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
* ###Update (18.09.2019): Update every file which has a hex hole for a M3 nut. While I reworked the complete design with Fusion360, I measured the holes the wrong way. I'm very sorry for that!
- Update (22.04.2019): Complete rework with Fusion360. Increased the spaces for perspex from 2.0mm to 2.5mm and 3.0mm to 3.5mm. I hope it will fit now without any problems. Added the Fusion360 (*.f3d) files in separate ZIP-Files.
- Update (21.04.2019): Added original SketchUp (*.skp) files in separate ZIP-files. (Outdated)
- Update (07.07.2018): Added version for 3mm Perspex
- Update (09.09.2018): Updated Hinge_bracket_2mm_Perspex_x4.stl because it made errors in Simplify3D. Please use Hinge_bracket_2mm_Perspex_x4_v3.stl!
- Update (23.10.2018): Added pictures of dimensions from MY enclosure. Please read the notes in the description below!
- Update (28.11.2018): Reworked the whole file structure and fixed a problem with some round corners that should be sharp.
###Note perspex!
###The dimensions are measured from MY enclosure. I strongly recommend to built up the enclosure and measure the needed dimensions yourself, because I have no clue how precise the lack tables are.
###For the holes I recommend to insert the perspex in the holder and either drill through the holes in the holders or mark the holes and drill them when you took out the perspex again.
###I do not guarantee, that the dimensions will fit with your enclosure.
Template for my design was…
