Have us print this for you
PLA from £6 inc. UK delivery on letter-sized prints. We slice, print on a calibrated Creality K2 / Bambu A1, QC and post.
This is a cutaway model of Turboprop Engine having following features for educational purpose.
Features are:
(1) Centrifugal (Impeller type) compressor
(2) Can type Combustion Chamber
(3) Axial Flow Turbine
(4) Reduction gears and propeller shaft
(5) Air inlet cowling with Oil Cooler Air Passage
Download files includes;
-files: STL Files
-images: STL File Figure and Index Picture for assembly Aid
Purchase Parts Information;
-Bearings
WBC6-12ZZ (6 x 12 x 4) 6ea - Assemble to outer holes of each Panel
F686ZZ(6 x 1 3x 5) 2ea - Assemble to center of each Panel
689ZZ (9 x 17 x 5) 2ea - For LP and HP Impeller
6900ZZ (10 x 22 x 6) 2ea - For Prop-Shaft, Turbine Shaft
-Aluminum Tubes
9mm dia x Appox. 70mm - as Compressor Rotor Shaft (Make slots both ends)
6mm dia x Appox. 100mm - as Turbine to Compressor Coupling Shaft
-Screws
Micro screws M1.4x3L - Appox. 70 ea - Direct screw-in to 1 mm dia hole (No nut),
Head side flange hole is 1.5 mm dia.
Screws M2 x 20L - 1ea - M2 Tap is used - Starter associate parts
Screws M2 x 10L - Appox. 12ea - M2 Tap is used - Red. Gear Panels associate parts and IGV
Screws M2 x 6L - Appox. 4ea - M2 Tap is used - Diffusers and Turb. Shaft Coupling
Assembly Points
- Rotors, Gear Train Set and Casings can be assembled and adjusted separately.
- Combustion Air Casing is slid to the outlet elbow assembly until aft end clears…
