Swimbait fishing Lure 12.5cm (easy print and build)

**Easy to print and assembly Swimbait! 100% working! No epoxy needed!**
https://www.youtube.com/watch?v=S0dHQe9rUwA
https://www.youtube.com/watch?v=zMJNkh_bI90

*I worked really long on this lure, so please leave a like, a make and maybe a small tip!!!*

**UPDATE 30.03.2019**
**I uploaded Version2** with some improvements and in 2 different weights. (see picture) I did not delete V1.

**UPDATE 05.08.2018** (for information scroll all the way down.)


There are 4 different Heads and 2 different Mid parts. Look on the first picture and you will figure it out ;) I also designed Line Thru Head versions. You find them under remix.
If you want a swimbait without lip, use the head from my glide bait. it works! https://www.thingiverse.com/thing:3024271

For assembly instructions scroll down.

## **Print settings:**

***100% infill !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!**
2 outer walls
0.1 - 0.2mm layer height
no support (only for Fin)
no top and bottom layers (only important for S3D users)
Print orientation like on pic 2!!!*

I allways drop one pellet of silica gel with tweezers into every air chamber while printing. So i have a rattle sound and i notice when there is water inside. (then there is no rattle sound anymore)
But with my printer and settings it is waterproof without epoxy.


**If you want to support me, check out my other lures i…