Minimalist quick change toilet paper holder [V2.3c]

A wise man once said:
> **_« When you come home from the Mexican restaurant, every second counts. »_**

Quick change toilet paper holders have been around for, like, well for about as long as toilet paper rolls!

There are many different designs, and some started to 3D print their own, but I couldn't find one that met my requirements, I wanted it simple, minimalist, good looking, easy and quick to print and assemble, so I designed my own version that can hold paper rolls up to ~110mm long.

Demo video: https://www.youtube.com/watch?v=gMhw1-LAq3o
Assembly video: https://www.youtube.com/watch?v=RugunoucFc0

I've put many holes on the base so you can screw it almost anywhere even if you already have holes in you wall, they are 5mm appart from each other, allowing any spacing from 10mm to 100mm hole to hole.

It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45° overhang.

It requires no additional hardware appart from the screws you'll need to attach the base to the wall, it is made to be used with any M4 or M5 screws.

Assembly and installation are very easy:

1. Print all the parts by simply printing the *all_in_one.stl* file, each part is also available as an independant STL file if you need.
2. Clean them from any defects they might have (imperfections due to stringing or over extrusion, etc).
3.…